Formation Damage and Matrix Treatment Technology Training

By Posted on

Objective:

This course is aimed at reservoir engineers, production technologists, stimulation engineers and production chemists concerned with limiting or removing formation damage from the wellbore or near wellbore area. Basic familiarity with field pumping operations will be assumed.

Course Description:

The objective of this course is to identify generic formation damage mechanisms and the correct chemical methods to treat each case. The course emphasizes the role of well performance and the impact of formation damage skin on well PI. The practical impact of various forms of damage will be examined using the WellFlo module incorporated within the FloSystem suite of production optimization software.

Course Contents:

  1. Candidate Selection
    • Radial Darcy flow, IPR, skin characterization
    • Damage depth and severity, matrix treatment objectives
  2. Damage Characterization
    • Sources of formation damage
    • Generic types of damage
  3. Special Damage Removal Treatments
    • Emulsions, water blocks, wettability alteration
    • Inorganic scale, paraffin and asphaltenes, bacterial damage
  4. Sandstone Acidizing
    • Sandstone structure and mineralogy
    • Mud Acid, acid chemistry
    • Secondary precipitation
    • Review of acid systems
  5. Acid Additives
    • Iron control
    • Corrosion inhibition
    • Clay stabilization
  6. Acid Placement and Diversion
    • Mechanical placement methods
    • Chemical diversion techniques (foam, gels, particulates)
  7. Treatment Design
    • Pre flush, after flush
    • Treatment volumes
    • Approaches to acid treatment modeling
  8. Carbonate Acidizing
    • Carbonate reaction chemistry
    • Diffusion, worm holing
    • Fracture acidizing
  9. Treatment Evaluation
    • Steady state and transient response
    • Paccaloni’s technique
  10. Horizontal Wells
    • Occurrence and importance of damage
    • Drilling and completion practices
    • Formation damage treatment strategies
    • Selectivity and fluid placement

Instructor & CV

Mia Ferian Helmy, ST, MT

  • EDUCATION
    Master Degree in study of Petroleum Engineering, Institute Technology of Bandung, West Java, Indonesia. GPA score 3.42 scale of 4.00.
    Thesis : Brownfield Integrated Production Optimization at Field Z.
    Bachelor Degree in study of Petroleum Engineering; Faculty of Mineral Technology, UPN Veteran Yogyakarta, Indonesia. GPA score 3.10 scale of 4.00.
    Thesis : Determining The Performance Of Fluid Flow Work In Porous Media According to Pressure Build Up Analyze In Well “MFH-07” And “MFH-09” At “VH” Field

RESEARCH AND PROJECT INVOLVEMENT

  • 2007 : Support Welltest Engineer at PT. PERTAMINA EP REG JAWA by using Ecrin V.03 (Kappa Enginering).
  • 2008 : Surveyor for Development System Low and Off, Design Artificial Lift and Chemical Usage inventory by BPMIGAS at PT. SURVEYOR INDONESIA
  • 2008 – 2010: Field Engineer (Sonolog and Dynamometer) for Production Optimization using Echometer with PT. MANDIRI UTAMA DUA.
  • 2012: Team Member of EOR Massive, PT. Pertamina EP.
  • 2013 : Junior Production Engineer for POFD Field Samboja, PT. Pertamina EP Asset 5
  • 2013: Junior Production Engineer for GGR study of MM-MKN-MML Field on ONWJ (Offshore North West Java Block) PT. Pertamina Hulu Energi
  • 2014 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-1
  • 2015 : Junior Production Engineer for POFD Field Klamono, PT. Pertamina EP Asset 5.
  • 2015 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-2
  • 2015 : Junior Production Engineer for GGR Study Of Jenggolo And Bukit Panjang Structure, Ketapang Block in Offshore Madura

SEMINAR/COURSE/TRAINING

  1. 2015 Assistent Trainer For Material Balance Using IPM Petroleum Expert by PT. Geoservices, Malang.
  2. 2014 Assistent Trainer For “Pelatihan Software Simulasi Reservoir” PT. PERTAMINA EP Asset 2, Prabumulih.
  3. 2014 Assistent Trainer For Gathering, Allocation and Production Optimization Using IPM Petroleum Expert by PT. Geoservices, Yogyakarta.
  4. 2013 Trainer For Gas Exploitation, Treatment and Handling By PT. QIP – Yogyakarta.
  5. 2013 Participant of “Aspek POD/POFD”, By SKKMIGAS and PT. Pertamina EP, Solo
  6. 2012 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
  7. 2011 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
  8. 2011 Trainer For Gas Treatment and Handling Facility Training, By PT. WISH, Yogyakarta.
  9. 2011 Participant For Production Optimization for Sucker Rod Pump, Training with Marsigit, M. By PT. Pura Nusa Kencana – Yogyakarta.
  10. 2011 Participant of “Workshop EOR Untuk Peningkatan Produksi Minyak Nasional”, By BPMIGAS, Bandung.
  11. 2010 Assistent Trainer For Basic Sonolog dan Dynamometer Training By PT. WISH – Yogyakarta.

HANDLING OF SOFTWARE

  •  Well Test Simulation : Saphir 3.20, Ecrin v 4.02 (Kappa Engineering).
  • Total Well Management Software for Echometer.
  •  Petrel (basic knowledge)
  •  Eclipse.
  •  Pipesim.
  •  Field Planning Tool.
  •  IPM (Porsper)

Kami memberikan alternatif Fasilitas atas Investasi anda dalam Program ini, diantaranya :

  1. Sertifikat, Peralatan Training, USB, Souvenir, Lunch, Coffe Break, City Tour
  2. Running minimal 2 Orang (Semarang, Jogja, Solo), Running minimal 3 Orang (Bandung, Jakarta), Running 4 Orang diperuntukan untuk daerah (Bali, Lombok, Manado, Balikpapan)
  3. Kami menyediakan transportasi antar Jemput dari Stasiun/Bandara ke Tempat Pelatihan(Hotel) bagi perusahaan yang Running minim 2 Orang
  4. Harga dilampirkan di Brosur Penawaran

Untuk daerah luar Kota Yogyakarta Harga Menyesuaikan.

Hotel Pilihan (Sementara) Bisa Menyesuaikan sesuai Kesepakatan.

  1. Hotel Ibis Malioboro, Yogyakarta
  2. Hotel Ibis, Solo
  3. Hotel Ibis Simpang Lima Semarang
  4. Hotel Fave, Balikpapan
  5. The Santosa Villa and Resort, Lombok
  6. Hotel Nagoya Plaza, Batam
  7. Hotel Gino Ferruci, Bandung
  8. Hotel Fave Pasar baru Jakarta, Jakarta
  9. Hotel Santika Kuta, Bali
  10. Hotel Aston, Manado
  11. Hotel Santika Pandegiling, Surabaya

______________________________________________________________________________________________________________________

Tambahan Informasi :

1. Silahkan tanyakan ketersediaan Tanggal dan Waktu dari jadwal training terbaru apabila anda tidak menemukan waktu yang sesuai dengan jadwal anda.

2. Training dapat disesuaikan dengan kebutuhan perusahaan jika dalam bentuk In-House Training. Silahkan baca ketentuan In-House Training diwebsite kami atau hubungi kami di Nomer Mobile untuk mendapatkan Fast Respon.

3. Silahkan mengisi Form Request Training di website kami untuk mendapatkan informasi tambahan yang belum ada, atau jika anda ingin menanyakan usulan materi sesuai kebutuhan perusahaan. Hubungi kami lewat email yang tertera atau Register disini!

4. Apabila telah menerima Silabus Training, Customer dapat Request Waktu Training yang diinginkan.

5. Informasi dan Data yang jelas akan memudahkan kami untuk segera merespon permintaan anda.

Customer Dapat Request Tempat, Waktu, serta Fasilitas Training. Silahkan Hubungi kami untuk Menerima Brosur Penawaran.

 

Related posts:

Leave a Reply

Your email address will not be published. Required fields are marked *