Electrical Wiring Installation and Inspection Procedure

Overview:

There was very little planning of wiring installations in those early days, but now, with supplies from the grid, very large sources of power are introduced into all premises which use electricity, and proper planning and design have become essential.

Like fire, electricity is a very good servant, but if not properly controlled and used it can prove to be a very dangerous master. The need for planned methods of wiring and installation work has long been recognized and all kinds of regulations, requirements, recommendations, codes of practice and so on have been issued. Some are mandatory and can be enforced by law, whilst others are merely recommendations. A Designer of an electrical installation and subsequently the maintenance team are all expected to provide and ensure that an electrical installation is safe, cost effective and reliable throughout its lifetime.

As a result of many years developing and teaching courses devoted to compliance with the IEE Wiring Regulations for low voltage installations up to 750V & IEC 60364 as well, it has become apparent to me that many operatives and personnel in the electrical contracting industry have forgotten the basic principles and concepts upon which electric power supply and its use are based.

As a result of this, misconceived ideas and much confusion have arisen over the interpretation of the Regulations.
It is the intention of this course to dispel such misconceptions and to educate and where necessary refresh the memory of the trainee.

In this respect, emphasis has been placed on those areas where most confusion arises, namely earthing and bonding, protection, and circuit design.

objective:

On successful completion of this course, delegates will understand:

• The latest requirements of the IEE Regulations and the required Electrical Design concepts.
• Working within an environment controlled by IEE Regulations.
• The basis for safety and functional design.
• Inspection and testing techniques that affect the maintenance routine of an installation

Who Should attend:

This program is designed for:
Electrical Managers, Electrical Supervisors, Electricians and personnel involved in the design of Electrical Systems with at least two years experience in the electrical power industry.

Out Lines:

Fundamental requirements for safety & Basics
Review of Electrical Fundamentals
Earthing & Bonding.

• Earth: what it is, and why and how we connect to it.
• Earthing systems & Earth electrodes.
• System classification & Requirements  (TN system, TN-C system, TN-S system,  TN-C-S system, TT system & IT system).
• Earth fault loop impedance.
• Residual current devices.
• Supplementary bonding.
• Earthing conductors
• Earthing arrangement selection.

Protection & Shock.

• What is protection?
  • Protection against mechanical damage.
  • Protection against electric shock.
  • Protection against overcurrent.
  • Protection against undervoltage.
  • Protection against overvoltage.
  • Protection against fire.

Control.

• • Isolation and switching.

Circuit design.

• • Design procedure.
  • Design current.
  • Nominal setting of protection.
  • Correction factors.
  • Tabulated current-carrying capacity.
  • Choice of cable size.
  • Voltage drop.
  • Shock risk.
  • Thermal constraints.
  • Example of circuit design.
    • Design problem.

Conduit Installations & Raceways
Testing and inspection.

• • • Testing sequence.
    • Continuity of protective conductors.
    • Continuity of ring final circuit conductors.
    • Insulation resistance.
    • Polarity.
    • Earth electrode resistance.
    • Earth fault loop impedance.
    • Prospective fault current
    • Functional testing.

————————————————————————————————

Investasi dan Fasilitas

• Harga : (dilampirkan dalam Brosur penawaran)
• Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
• Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
• Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta ( Jakarta & Bandung) –  ( Untuk Manado, Bali , Balikpapan dan Lombok Quota minimal 4 peserta)

Tempat (Tentative):

• Hotel Santika Kuta, Bali
• Hotel Nagoya Plaza, Batam
• Hotel Fave, Balikpapan
• Hotel Aston, Manado
• The Santosa Villas and Resort, Lombok
• Hotel Gino Ferucci, Bandung
• Hotel Santika Pandegiling, Surabaya
• Hotel Fave Pasar baru Jakarta, Jakarta
• Hotel Ibis Solo
• Hotel Ibis Simpang Lima, Semarang
• Hotel Ibis Malioboro, Yogyakarta

Mobile : (081215875419 / 085643156780)

Email : seminarcenterindonesia@gmail.com / indotciproconsultant@gmail.com

Web: jadwalinformasitraining.com

Catatan :

• Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
• Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
• Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.
• Peserta bisa mengajukan Tanggal Pelatihan / Training selain yang tertera pada silabus penawaran