APPLIED DRILLING ENGINEERING

OBJECTIVES

The oil and gas industry world wide dedicates part of it resources to assure long term supply of its oil and gas. Effective planning, implementation of new technologies, application of successful drilling practices and utilization of “learning curve” are some of the strategies used to achieve the objectives. Drilling cost accounts for more than 65% of the total well cost and therefore, reduction in cost related to the drilling operations can have very significant impact on the total economic viability of oil/gas resource base. It has been shown in many situations that drilling costs can vary by more than plus or minus 50% even for wells drilled in the same geologic areas with some objective. The reason is that different organizations use different drilling practice some of which are more cost effective than others. If all operators implement only successful practices the variation gap will be significantly reduced along with the total drilling costs.

This workshop will address all the issues that impact on what is called effective well planning that include all drilling programs, needed information essential for successful drilling practices, analysis and diagnosis of information, safety and environmental aspects, learning (experience) curve, drilling problems anticipation and contingency planning for solutions, Round table discussion will follow each lecture presentation.

COURSE CONTENT

THE DRILLING PROGRAM

Well Summary
Drilling Procedures and Parameters
Evaluation Phase and Emergency
Deviations from the Drilling Program

SOURCES OF INFORMATIN FOR ANALYSIS AND PLANNING

Geology and Seismic Data
Analysis and Review of Offset Wells
Information from Logs
Reservoir Characteristics
Government Regulations
Service Companies Recommendation
Personnel and Organizational Contracts
Logistic Records, Weather Data and Technical Papers

ANALYSIS OF INFORMATION DURING PLANNING STAGE

Potential Problems
Critical Examination of Available Data
Post-Well Analysis and Report
Well planning Checklist
Flow-Chart for Well Planning
Well Planning and Safety Assessment

PORE PRESSURE / CASING SEAT COLLECTION

Pore Pressure Estimation
Casing Seat Selection

RIG SELECTION AND EVALUATION

Hoisting
Hydraulics
Rotary
Well Control
Solids Removal
Drilling string
The Contractor History
Special Equipment

DRILLING FLUIDS PROGRAM PLANNING

Review of Drilling Fluids (Functions, Types, Properties)
Drilling Fluids Related Problems
Selection by Hole Interval

DRILLSTRING BIT PROGRAM PLANNING

Review of Drill Bits (Types, Cutting Mechanism)
Selection of Type
Operation Parameters Selection
Evaluation of Performance

DRILLSTRING PLANNING

Drill Pipe and Bottom Hole Assembly Design
Inspection

DRILLING FLUIDS HYDRAULICS PLANNING

Bit Hydraulics
Annular Hole Cleaning
Equivalent Circulating Mud Densities
Well Control Mechanics

CASING AND CEMENTING

POTENTIAL DRILLING PROBLEMS BY INTERVAL

Problems Likely to Occur-solution and/or Prevention
Contingencies

IMPROVEMENT ON PERFORMANCE

PRE-SPUD ACTIVITIES

WHO SHOULD ATTEND

Drilling engineers, production and completion engineers, general petroleum engineers, reservoir engineers, operation engineers, geologist, geophysicist, supervisors, technical managers and field foremen.

Instructor & CV

Mia Ferian Helmy, ST, MT

EDUCATION

Master Degree in study of Petroleum Engineering, Institute Technology of Bandung, West Java, Indonesia. GPA score 3.42 scale of 4.00.
Thesis : Brownfield Integrated Production Optimization at Field Z.
Bachelor Degree in study of Petroleum Engineering; Faculty of Mineral Technology, UPN Veteran Yogyakarta, Indonesia. GPA score 3.10 scale of 4.00.
Thesis : Determining The Performance Of Fluid Flow Work In Porous Media According to Pressure Build Up Analyze In Well “MFH-07” And “MFH-09” At “VH” Field

RESEARCH AND PROJECT INVOLVEMENT

2007 : Support Welltest Engineer at PT. PERTAMINA EP REG JAWA by using Ecrin V.03 (Kappa Enginering).
2008 : Surveyor for Development System Low and Off, Design Artificial Lift and Chemical Usage inventory by BPMIGAS at PT. SURVEYOR INDONESIA
2008 – 2010: Field Engineer (Sonolog and Dynamometer) for Production Optimization using Echometer with PT. MANDIRI UTAMA DUA.
2012: Team Member of EOR Massive, PT. Pertamina EP.
2013 : Junior Production Engineer for POFD Field Samboja, PT. Pertamina EP Asset 5
2013: Junior Production Engineer for GGR study of MM-MKN-MML Field on ONWJ (Offshore North West Java Block) PT. Pertamina Hulu Energi
2014 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-1
2015 : Junior Production Engineer for POFD Field Klamono, PT. Pertamina EP Asset 5.
2015 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-2
2015 : Junior Production Engineer for GGR Study Of Jenggolo And Bukit Panjang Structure, Ketapang Block in Offshore Madura

SEMINAR/COURSE/TRAINING

2015 Assistent Trainer For Material Balance Using IPM Petroleum Expert by PT. Geoservices, Malang.
2014 Assistent Trainer For “Pelatihan Software Simulasi Reservoir” PT. PERTAMINA EP Asset 2, Prabumulih.
2014 Assistent Trainer For Gathering, Allocation and Production Optimization Using IPM Petroleum Expert by PT. Geoservices, Yogyakarta.
2013 Trainer For Gas Exploitation, Treatment and Handling By PT. QIP – Yogyakarta.
2013 Participant of “Aspek POD/POFD”, By SKKMIGAS and PT. Pertamina EP, Solo
2012 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
2011 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
2011 Trainer For Gas Treatment and Handling Facility Training, By PT. WISH, Yogyakarta.
2011 Participant For Production Optimization for Sucker Rod Pump, Training with Marsigit, M. By PT. Pura Nusa Kencana – Yogyakarta.
2011 Participant of “Workshop EOR Untuk Peningkatan Produksi Minyak Nasional”, By BPMIGAS, Bandung.
2010 Assistent Trainer For Basic Sonolog dan Dynamometer Training By PT. WISH – Yogyakarta.

Kami memberikan alternatif Fasilitas atas Investasi anda dalam Program ini, diantaranya :

Sertifikat, Peralatan Training, USB, Souvenir, Lunch, Coffe Break, City Tour
Running minimal 2 Orang (Semarang, Jogja, Solo), Running minimal 3 Orang (Bandung, Jakarta), Running 4 Orang diperuntukan untuk daerah (Bali, Lombok, Manado, Balikpapan)
Kami menyediakan transportasi antar Jemput dari Stasiun/Bandara ke Tempat Pelatihan(Hotel) bagi perusahaan yang Running minim 2 Orang
Harga dilampirkan di Brosur Penawaran

______________________________________________________________________________________________________________________

Tambahan Informasi :

1. Silahkan tanyakan ketersediaan Tanggal dan Waktu dari jadwal training terbaru apabila anda tidak menemukan waktu yang sesuai dengan jadwal anda.

2. Training dapat disesuaikan dengan kebutuhan perusahaan jika dalam bentuk In-House Training. Silahkan baca ketentuan In-House Training diwebsite kami atau hubungi kami di Nomer Mobile untuk mendapatkan Fast Respon.

3. Silahkan mengisi Form Request Training di website kami untuk mendapatkan informasi tambahan yang belum ada, atau jika anda ingin menanyakan usulan materi sesuai kebutuhan perusahaan. Hubungi kami lewat email yang tertera atau Register disini!

4. Apabila telah menerima Silabus Training, Customer dapat Request Waktu Training yang diinginkan.

5. Informasi dan Data yang jelas akan memudahkan kami untuk segera merespon permintaan anda.