Production Optimization Training

Production Optimization Training

Objective:

The course is intended for petroleum, reservoir and production engineers and others interested in methods of increasing and/or optimizing oil recovery through analyzing and upgrading the production system by installation or upgrade of artificial lift and other means. The course deals primarily with flow modeling of the production system and thus forms a logical extension to its companion course entitled “Well Inflow Optimization “, although attendance at the latter is not a prerequisite.

Course Description:

The course is based on a consideration of the total production system, from reservoir to surface. A brief review of inflow performance is followed by the development of concepts of single and multiphase flow up through the production tubing. Emphasis is placed on analysis of vertical lift characteristics of producing wells by means of Nodal analysis. An important element of the course consists of artificial lift design, particularly with respect to gas lift, ESPs and jet pumps.

An introduction to multi well modeling and optimization is also included. The course contains many practical examples of production optimization and related field problems. The solution to these problems is aided by use of the interactive FloSystem suite of computer programs.

Course Contents:

1. Reservoir Performance
   • Reservoir inflow performance: oil wells
   • Transient, PSS and steady state flow
   • Fluid PVT modeling
   • Pressure formulations for gas inflow
   • Non-Darcy flow
   • Elements of measured skin
2. Vertical Lift Performance
   • Vertical lift performance
   • Single phase flow in pipes
   • Flow through restrictions and chokes
   • Nodal analysis
   • Multiphase flow: hold-up, flow regime maps and flow correlations
   • Temperature and heat loss modeling
   • Well performance modeling
   • Well model tuning to field requirements
3. Introduction to Artificial Lift
   • Requirement and justification for artificial lift
   • Artificial lift techniques
4. Gas Lift Technology
   • Gas lift requirement evaluation
   • Single well gas lift design
   • Transfer margins and valve spacing
   • Compression, casing head conditions
   • Fluid and casing controlled valves
   • Sizing of gas lift valves
   • Economic considerations
5. Electric Submersible Pumps and Jet Pumps
   • Pump applications
   • Lift hydrodynamics
   • Pump components, construction and assembly
   • Pump performance, design and selection methodology
   • Economic considerations
6. Multi well Production Optimization
   • Well performance curves
   • Lift gas allocation case study

Instructor & CV

MIA FERIAN HELMY

EDUCATION
2010 – 2012 : Master Degree in study of Petroleum Engineering, Institute Technology of Bandung, West Java, Indonesia. GPA score 3.42 scale of 4.00.
Thesis : Brownfield Integrated Production Optimization at Field Z.
2001 – 2007 : Bachelor Degree in study of Petroleum Engineering; Faculty of Mineral Technology, UPN Veteran Yogyakarta, Indonesia. GPA score 3.10 scale of 4.00.
Thesis : Determining The Performance Of Fluid Flow Work In Porous Media According to Pressure Build Up Analyze In Well “MFH-07” And “MFH-09” At “VH” Field

RESEARCH AND PROJECT INVOLVEMENT
2007 : Support Welltest Engineer at PT. PERTAMINA EP REG JAWA by using Ecrin V.03 (Kappa Enginering).
2008 : Surveyor for Development System Low and Off, Design Artificial Lift and Chemical Usage inventory by BPMIGAS at PT. SURVEYOR INDONESIA

2008 – 2010: Field Engineer (Sonolog and Dynamometer) for Production Optimization using Echometer with PT. MANDIRI UTAMA DUA.

2012: Team Member of EOR Massive, PT. Pertamina EP.

2013 : Junior Production Engineer for POFD Field Samboja, PT. Pertamina EP Asset 5
2013: Junior Production Engineer for GGR study of MM-MKN-MML Field on ONWJ (Offshore North West Java Block) PT. Pertamina Hulu Energi
2014 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-1
2015 : Junior Production Engineer for POFD Field Klamono, PT. Pertamina EP Asset 5.

2015 : Junior Production Engineer for GGR Study of Pacific Oil and Gas, Phase-2
2015 : Junior Production Engineer for GGR Study Of Jenggolo And Bukit Panjang Structure, Ketapang Block in Offshore Madura

SEMINAR/COURSE/TRAINING

1. 2015 Assistent Trainer For Material Balance Using IPM Petroleum Expert by PT. Geoservices, Malang.
2. 2014 Assistent Trainer For “Pelatihan Software Simulasi Reservoir” PT. PERTAMINA EP Asset 2, Prabumulih.
3. 2014 Assistent Trainer For Gathering, Allocation and Production Optimization Using IPM Petroleum Expert by PT. Geoservices, Yogyakarta.
4. 2013 Trainer For Gas Exploitation, Treatment and Handling By PT. QIP – Yogyakarta.
5. 2013 Participant of “Aspek POD/POFD”, By SKKMIGAS and PT. Pertamina EP, Solo
6. 2012 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
7. 2011 Assistent Trainer For Gas Treatment and Handling Facility Training with Dr. Ir. Herianto, MT, PhD. By PT. WISH – Yogyakarta.
8. 2011 Trainer For Gas Treatment and Handling Facility Training, By PT. WISH, Yogyakarta.
9. 2011 Participant For Production Optimization for Sucker Rod Pump, Training with Marsigit, M. By PT. Pura Nusa Kencana – Yogyakarta.
10. 2011 Participant of “Workshop EOR Untuk Peningkatan Produksi Minyak Nasional”, By BPMIGAS, Bandung.
11. 2010 Assistent Trainer For Basic Sonolog dan Dynamometer Training By PT. WISH – Yogyakarta.

HANDLING OF SOFTWARE

•  Well Test Simulation : Saphir 3.20, Ecrin v 4.02 (Kappa Engineering).
•  Total Well Management Software for Echometer.
•  Petrel (basic knowledge)
•  Eclipse.
•  Pipesim.
•  Field Planning Tool.
•  IPM (Porsper)

 

 

Kami memberikan alternatif Fasilitas atas Investasi anda dalam Program ini, diantaranya :

1. Sertifikat, Peralatan Training, USB, Souvenir, Lunch, Coffe Break, City Tour
2. Running minimal 2 Orang (Semarang, Jogja, Solo), Running minimal 3 Orang (Bandung, Jakarta), Running 4 Orang diperuntukan untuk daerah (Bali, Lombok, Manado, Balikpapan)
3. Kami menyediakan transportasi antar Jemput dari Stasiun/Bandara ke Tempat Pelatihan(Hotel) bagi perusahaan yang Running minim 2 Orang
4. Harga dilampirkan di Brosur Penawaran

Untuk daerah luar Kota Yogyakarta Harga Menyesuaikan.

Hotel Pilihan (Sementara) Bisa Menyesuaikan sesuai Kesepakatan.

1. Hotel Ibis Malioboro, Yogyakarta
2. Hotel Ibis, Solo
3. Hotel Ibis Simpang Lima Semarang
4. Hotel Fave, Balikpapan
5. The Santosa Villa and Resort, Lombok
6. Hotel Nagoya Plaza, Batam
7. Hotel Gino Ferruci, Bandung
8. Hotel Fave Pasar baru Jakarta, Jakarta
9. Hotel Santika Kuta, Bali
10. Hotel Aston, Manado
11. Hotel Santika Pandegiling, Surabaya

______________________________________________________________________________________________________________________

Tambahan Informasi :

1. Silahkan tanyakan ketersediaan Tanggal dan Waktu dari jadwal training terbaru apabila anda tidak menemukan waktu yang sesuai dengan jadwal anda.

2. Training dapat disesuaikan dengan kebutuhan perusahaan jika dalam bentuk In-House Training. Silahkan baca ketentuan In-House Training diwebsite kami atau hubungi kami di Nomer Mobile untuk mendapatkan Fast Respon.

3. Silahkan mengisi Form Request Training di website kami untuk mendapatkan informasi tambahan yang belum ada, atau jika anda ingin menanyakan usulan materi sesuai kebutuhan perusahaan. Hubungi kami lewat email yang tertera atau Register disini!

4. Apabila telah menerima Silabus Training, Customer dapat Request Waktu Training yang diinginkan.

5. Informasi dan Data yang jelas akan memudahkan kami untuk segera merespon permintaan anda.

Customer Dapat Request Tempat, Waktu, serta Fasilitas Training. Silahkan Hubungi kami untuk Menerima Brosur Penawaran.